Hagie 204, Operator'S Manual

Page: 95 / 141

NOTE:
When cleaning cooling fins of the radiator, oil
cooler, or A/C condenser with compressed
air or water, be careful not to damage cooling
fins which may impair cooling capabilities.
NOTE:
Failure to keep cooling systems clean
can cause over heating and damage to
the hydrostatic system and/or engine.
x
VII. SERVICE AND MAINTENANCE
Grille Screens
In order to maintain maximum air flow through the engine
cooling system’s radiator, oil cooler, and air conditioning
condenser, the cooling air intake grille screens must be
inspected often and periodically removed for cleaning.
FILTERS
FILTERS CONTINUED
REMOVAL - The side grille screens are easily removed by
sliding them up out of their housings (fig. 7.18). The top screen
is held in place by two bolts (fig. 7.19) and may also be removed
for cleaning.
CLEANING - Compressed air will dislodge most large trash
or loose dirt after the screens have been removed (fig. 7.20).
Blow out the screens away from the machine. Water from a
pressurized hose may also be used, or if necessary the screens
may be soaked in soapy water and scrubbed with a brush.
FIG 7.20
FIG 7.18
FIG 7.19