Hagie 204, Operator'S Manual

Page: 105 / 141

VII. SERVICE AND MAINTENANCE
ELECTRICAL CONTINUED
Fuses
Fuses protect individual lighter duty electrical
circuits. They are located toward the rear
console panel to the right of the operator’s seat
(fig. 7.44).
If a fuse blows, remove it by rotating the fuse
cap counterclockwise as you push down. Then
pull the fuse straight out (fig. 7.46). Replace
each blown fuse with the same amperage fuse
only.
Correct fuse location and amperage is
shown in figure 7.45. If the fuse continues to
blow, determine the cause and correct it.
FUSES CONTINUED
FIG 7.45
Motor control block .................................. 10 AMP
Tasseltrol
®
box, seat motor (cab only) .... 10 AMP
Gauges, traction valve, dome light (cab only),
AM/FM radio (cab only) ........................... 10 AMP
Flasher/turn signal, running lights, windshield
Wiper (cab only), fuel pumps (gas only),
Fuel selector valve (diesel only) .............. 10 AMP
MTR CTRL BLOCK TASSELTROL
®
BOX
SEAT MTR (CAB ONLY)
GAUGES
TRACTION VALVE
DOME LIGHT (CAB ONLY)
AM/FM RADIO (CAB ONLY)
FLASHER/TURN SIGNAL
RUNNING LIGHTS
WIPER (CAB ONLY)
FUEL PUMPS (GAS ONLY)
FUEL SLCTR VLV (DIESEL)
FIG 7.44
x
FIG 7.46