Hagie 204, Operator'S Manual

Page: 104 / 141

STORAGE - See page XXX for proper battery storage.
REPLACEMENT - When replacing the battery, install a
battery with ratings equivalent to or higher than the specs listed
in figure 7.43.
NOTE:
When servicing electrical system always disconnect
the battery. Remove ground cable first and connect it
NOTE:
To ensure the best electrical contact, battery terminal
connections should be as clean and as tight as possi-
ELECTRICAL
Battery
SAFETY
VII. SERVICE AND MAINTENANCE
Batteries contain sulfuric acid. Avoid contact with
skin, eyes, or clothing. Do not inhale fumes or in-
gest liquid. Batteries contain gases which can ex-
plode. Keep sparks and flame away while servicing.
CLEANING - Disconnect battery cables from battery.
Remove all corrosion with a wire brush or battery post brush (fig.
7.41). Wash the cable connections and battery posts with a
weak solution of baking soda or ammonia. Apply petroleum jelly
or grease to prevent future corrosion. Reconnect the cables to
the battery making sure they are tight. Clean every 100 hours.
FIG 7.43
DIESEL GASOLINE
VOLTAGE 12V (only) 12V (only)
CCA
(30 SEC
@ 0° F)
950 575
RESERVE
CAPACITY 185 min.
@ 25 amps
130 min.
@ 25 amps
x
FIG 7.42
FIG 7.41