Hagie 204, Operator'S Manual

Page: 109 / 141

Gasoline Engine Drive Belt
REMOVAL – Insert a 3/8 inch square ratchet drive
into the belt tensioner (fig. 7.56, item 1) and push in-
ward to remove the belt (fig. 7.56, item 2).
INSPECTION – Visually inspect the belt daily.
Check the belt for intersecting cracks (fig. 7.57).
Transverse (across the belt width) cracks are
acceptable. Longitudinal (direction of belt length)
cracks that intersect with transverse cracks are not
acceptable. Replace the belt if it is frayed or has
pieces of material missing.
Governor Drive Belt
Visually inspect the belt daily (fig. 7.56, item 3).
Replace if it becomes cracked or worn.
A/C Compressor Belt (if equipped)
To tighten the air conditioner drive belt, loosen the
three mounting bolts (fig. 7.58) and slide the compres-
sor mount in or out until the proper belt tension is
achieved. Inspect every 250 hours.
VII. SERVICE AND MAINTENANCE
HYDROSTATIC SYSTEM CONTINUED
x
FIG 7.57
FIG 7.58
FIG 7.56
1
2
3