Hagie 204, Operator'S Manual

Page: 102 / 141

FIG 7.38
A B
VII. SERVICE AND MAINTENANCE
Quad Pullers
Each quad puller head has four bearings equipped with
grease zerks (fig. 7.36). To ensure the longest life and best
performance, grease each bearing twice a day: suggested times
are morning and noon.
Male Row Choppers
Each male row chopper has two bearings equipped with
grease zerks (fig. 7.37). Grease each bearing once a day.
Torque Hub
®
Seal Boot
Each leg has a seal boot located between the wheel motor
and Torque Hub
®
. Seal boot grease zerks (fig. 7.38A & 7.38B)
should be greased once every 75 hours or as needed. An over-
greased seal boot will leak some grease out around the seal and
when heated may cause the appearance of a failed wheel motor
leaking hydraulic fluid. Wipe off any excess grease after
servicing.
LUBRICATION CONTINUED
x
FIG 7.37
FIG 7.36