Hagie 204, Operator'S Manual

Page: 26 / 141

1. To adjust the tread width in or out, park the detasseler on
level ground and shut off the engine.
x
IV. PREPARING TO OPERATE
WHEEL TREAD AND ROW SPACING
2. Loosen tie rod bolts (fig 4.2, item 2) and tie rod jam nuts (fig.
4.2, item 3). Remove the bolts and nuts from the tie rod.
NOTE:
Dimension A (fig. 4.1) must be equal (see
page XXX) and steering pivot must be in
vertical position (fig. 4.2, item 1).
FIG 4.1
A
A
FIG 4.2
1
2
3
2
3
Knowing the row spacing of the field one intends to detassel,
follow the steps below to properly obtain the desired tread