25
View
Local user view, user group view
Default Level
3: Manage level
Parameters
acl
acl-number
: Specifies the authorized ACL for the local user(s). The argument
acl-
number
is the authorized ACL number, in the range 2000 to 5999.
callback-number
callback-number
: Specifies the authorization PPP callback number of
the local user(s), where
callback-number
represents the authorization PPP callback
number, which is a case-sensitive string of one to 64 characters.
idle-cut
minute
: Enables the idle cut function for the local user(s), where
minute
represents the idle time allowed, in the range one to 120 minutes. With the idle cut
function enabled, an online user whose idle period exceeds the specified idle time will
be logged out.
level
level
: Specifies the level of the local user(s), which can be 0 for visit level, 1 for
monitor level, 2 for system level, and 3 for manage level. A smaller number means a
lower level. The default is 0. Command levels are described as follows:
Visit level
: Commands of this level are used to diagnose the network and change
the language mode of user interface, such as the ping, tracert, and language-
mode command. The Telnet command is also of this level. Commands of this level
cannot be saved in configuration files.
Monitor level:
Commands of this level are used to maintain the system and to
debug service problems. This level includes the display, debugging, reset
commands, and so on. Commands of this level cannot be saved in configuration
files.
System level:
Commands of this level are used to configure services. Commands
concerning routing and network layers are of system level. You can utilize network
services by using these commands.
Manage level:
Commands of this level are for the operation of the entire system
and the system supporting modules. Services are supported by these commands.
Commands concerning file system, file transfer protocol (FTP), downloading using
trivial file transfer protocol (TFTP), user management, and level setting are included
in this level.
user-profile
profile-name
: Specifies the authorization user profile of the local user(s),
where
profile-name
represents the name of the authorization user profile, a case-
