178
<Sysname> system-view
[Sysname] super authentication-mode local
Example 2:
Set the authentication mode for user privilege level switch to
scheme local
.
<Sysname> system-view
[Sysname] super authentication-mode scheme local
super password
Syntax
super password
[
level
user-level
] {
simple
|
cipher
}
password
undo super password
[
level
user-level
]
View
System view
Default Level
2: System level
Parameters
level
user-level
: User privilege level in the range 1 to 3, with the default as 3.
simple
: Plain text password.
cipher
: Cipher text password.
password
: Password, a string of characters. It is case-sensitive.
For simple password, it is a string of 1 to 16 characters.
For cipher password, it is a string of 1 to 16 characters in plain text or 24 characters
in cipher text. For example, the simple text “1234567” corresponds to the cipher
text “(TT8F]Y\5SQ=^Q`MAF4<1!!”.
Description
Use the
super password
command to set the password needed to switch from a lower
user privilege level to a higher one.
Use the
undo super password
command to restore the default.
By default, no password is set to switch from a lower user privilege level to a higher one.
If
simple
is specified, the configuration file saves a simple password.
If
cipher
is specified, the configuration file saves a cipher password.
The user must always enter a simple password, no matter
simple
or
cipher
is specified.
Cipher passwords are recommended, as simple ones are easily getting cracked.
