H3C WX Series Command Reference Manual Download Page 103

Page: 103 / 200

103

%Copy file flash:/test/1.cfg to flash:/testbackup/1backup.cfg...Done.

delete

Syntax

delete

[ /

unreserved

]

file

url

View

User view

Default Level

3: Manage level

Parameters

unreserved

: Permanently deletes the specified file, and the deleted file can never be

restored.

file

url

: Name of the file to be deleted. Asterisks (*) are acceptable as wildcards. For

example, to remove files with the extension of

.txt

in the current directory, you may use

the

delete *

.txt command.

Description

Use the

delete

command to move a specified file from a storage medium to the

recycle bin, where you can restore the file with the

undelete

command or permanently

delete it with the

reset recycle-bin

command.

The

dir /all

command can display the files moved to the recycle bin. These files are

enclosed in pairs of brackets.

CAUTION:

If you delete two files in different directories but with the same filename, only the last one is
retained in the recycle bin.

Examples

Remove file

tt.cfg

from the current directory.

<Sysname> delete tt.cfg
Delete flash:/tt.cfg? [Y/N]:y
.

%Delete file flash:/tt.cfg...Done.

dir

Syntax

dir

[ /

all

] [

file

url

]

Summary of Contents for WX Series









































































































































































































Search results

Summary of Contents for WX Series

Reviews:

Related manuals for WX Series

Brands by name

Popular brands

H3C WX Series, Command Reference Manual

Search results

Summary of Contents for WX Series

Reviews:

Related manuals for WX Series

Brands by name

Popular brands