H3C SR6600 SPE-FWM Fundamentals Configuration Manual Download Page 7

Page: 7 / 184

Login Procedure ····························································································································3-27

Console Login Authentication Modes····························································································3-30

Configuring None Authentication for Console Login ·····································································3-31

Configuring Password Authentication for Console Login ······························································3-32

Configuring Scheme Authentication for Console Login·································································3-33

Configuring Common Settings for Console Login (Optional) ························································3-36

Logging In Through Telnet ····················································································································3-38

Introduction····································································································································3-38

Telnet Login Authentication Modes ·······························································································3-39

Configuring None Authentication for Telnet Login ········································································3-40

Configuring Password Authentication for Telnet Login ·································································3-41

Configuring Scheme Authentication for Telnet Login····································································3-42

Configuring Common Settings for VTY User Interfaces (Optional)···············································3-45

Configuring the Device to Log In to Another Device as a Telnet Client ········································3-46

Logging In Through SSH ······················································································································3-47

Introduction····································································································································3-47

Configuring the SSH Server ··········································································································3-48

Configuring the SSH Client to Log In to the SSH Server ······························································3-49

Logging In Through the AUX Port·········································································································3-50

Introduction····································································································································3-50

AUX Login Authentication Modes··································································································3-51

Configuring None Authentication for AUX Login ···········································································3-52

Configuring Password Authentication for AUX Login····································································3-53

Configuring Scheme Authentication for AUX Login ······································································3-54

Configuring Common Settings for AUX Login (Optional) ······························································3-57

Configuration Requirements··········································································································3-59

Login Procedure ····························································································································3-59

Logging In Through Modems ················································································································3-62

Introduction····································································································································3-62

Configuration Requirements··········································································································3-62

Login Procedure ····························································································································3-63

Modem Login Authentication Modes ·····························································································3-66

Configuring None Authentication for Modem Login ······································································3-67

Configuring Password Authentication for Modem Login ·······························································3-68

Configuring Scheme Authentication for Modem Login··································································3-69

Configuring Common Settings for Modem Login (Optional) ·························································3-72

Displaying and Maintaining CLI Login···································································································3-74

4 NMS Login ················································································································································3-76

NMS Login Overview ····························································································································3-76

Configuring NMS Login ·························································································································3-76

NMS Login Example ·····························································································································3-78

5 User Login Control ··································································································································3-81

User Login Control Overview ················································································································3-81

Configuring Login Control over Telnet Users························································································3-81

Configuration Preparation ·············································································································3-81

Summary of Contents for SR6600 SPE-FWM

























































































































































































Search results

Summary of Contents for SR6600 SPE-FWM

Reviews:

Related manuals for SR6600 SPE-FWM

Brands by name

Popular brands

H3C SR6600 SPE-FWM, Fundamentals Configuration Manual

Search results

Summary of Contents for SR6600 SPE-FWM

Reviews:

Related manuals for SR6600 SPE-FWM

Brands by name

Popular brands