H3C SR6600 SPE-FWM, Fundamentals Configuration Manual

Page: 41 / 184

3-30
Figure 3-5 Configuration page
Step4 Execute commands to configure the device or check the running status of the device. To get help,
type ? .
Console Login Authentication Modes
Three authentication modes are available for console port login: none , password , and scheme .
z
none : Requires no username and password at the next login through the console port. This mode
is insecure.
z
password : Requires password authentication at the next login through the console port. Keep
your password.
z
scheme : Requires username and password authentication at the next login through the console
port. Authentication falls into local authentication and remote authentication. To use local
authentication, configure a local user and related parameters. To use remote authentication,
configure the username and password on the remote authentication server. For more information
about authentication modes and parameters, see AAA Configuration in the Security Volume .
Keep your username and password.
The following table lists console port login configurations for different authentication modes:
Authentication
mode
Configuration Remarks
None Configure not to authenticate users
For more information, see
Configuring None
Authentication for Console
Login
.
Configure to authenticate users by using the local
password
Password
Set the local password
For more information, see
Configuring Password
Authentication for Console
Login
.
Configure the authentication scheme Scheme
Select
an
authe
Remote AAA
authentication
Configure a
RADIUS/HWTACAC
S scheme
For more information, see
Configuring Scheme
Authentication for Console
Login
.