7-105
TFTP Client Configuration Example (On the SR6602 router)
Network requirements
z
As shown in
, use a PC as the TFTP server and Device as the TFTP client. Their IP
addresses are 1.2.1.1/16 and 1.1.1.1/16 respectively. Device and PC are reachable to each other.
z
Device downloads a boot file from PC for upgrading and uploads a configuration file named
config.cfg
to PC for backup.
Figure 7-2
Smooth upgrading using the TFTP client function
Configuration procedure
1) Configure the PC (TFTP Server), the configuration procedure is omitted.
z
On the PC, enable the TFTP server
z
Configure a TFTP working directory
2) Configure Device (TFTP Client)
If the available memory space of the device is not enough, use the
fixdisk
command to clear the
memory or use the
delete
/unreserved
file
-
url
command to delete the files not in use and then perform
the following operations.
# Enter system view.
<Sysname> system-view
# Download application file
newest.bin
from PC.
<Sysname> tftp 1.2.1.1 get newest.bin
# Upload a configuration file
config.cfg
to the TFTP server.
<Sysname> tftp 1.2.1.1 put config.cfg configback.cfg
# Specify
newest.bin
as the main boot file to be used at the next startup.
<Sysname> boot-loader file newest.bin main
# Reboot the device and the software is upgraded.
<Sysname> reboot
Summary of Contents for SR6600 SPE-FWM
Page 112: ...6 101...
