11-135
<Device> reboot
To check if the upgrade is successful after the device reboots, use the
display version
command.
Scheduled Upgrade Configuration Example (On the SR6602
router)
Network requirement
z
As shown in
, the current software version is
soft-version1
for the device.
Upgrade the software version of the device to
soft-version2
and configuration file to
new-config
at a time when few services are processed (for example, at 3 am) through
remote operations.
z
The latest application
soft-version2.bin
and the latest configuration file
new-config.cfg
are both saved in the
aaa
directory of the FTP server.
z
The IP address of the device is 1.1.1.1/24, the IP address of the FTP server is
2.2.2.2/24, and the device and FTP server can reach each other.
z
A user can log in to the device via Telnet, and the user and device can reach each
other.
Figure 11-2
Network diagram for scheduled upgrade
Configuration procedure
1) Configuration on the FTP server (Configurations may vary with different types of
servers)
z
Set the access parameters for the FTP client (including enabling the FTP server
function, setting the FTP username to
aaa
and password to
hello
, and setting the user
to have access to the
flash:/aaa
directory).
<FTP-Server> system-view
[FTP-Server] ftp server enable
[FTP-Server] local-user aaa
[FTP-Server-luser-aaa] password cipher hello
[FTP-Server-luser-aaa] service-type ftp
[FTP-Server-luser-aaa] authorization-attribute work-directory flash:/aaa
Summary of Contents for SR6600 SPE-FWM
Page 112: ...6 101...
