background image

 

9-124 

 

Do not unplug and plug a card during configuration rollback (that is, the system is executing the 

configuration replace file

 command). In addition, configuration rollback may fail if one of the following 

situations is present (if a command cannot be rolled back, the system skips it and processes the next 

one):  

z

 

The complete undo form of a command is not supported, namely, you cannot get the actual undo 

form of the command by simply putting the keyword 

undo

 in front of the command, so the complete 

undo form of the command cannot be recognized by the device. 

z

 

The configuration cannot be removed, such as hardware-related commands 

z

 

Commands in different views are dependent on each other 

z

 

If the replacement configuration file is not a complete file generated by using the 

save

 or 

archive 

configuration

 command, or the file is copied from a different type of device, the configuration 

cannot be rolled back. Ensure that the replacement configuration file is correct and compatible with 

the current device. 

z

 

The configuration file specified with the 

configuration replace file

 

filename

 command can only be 

a configuration file in simple text. Otherwise, errors may occur in configuration rollback. 

 

Specifying a Startup Configuration File to Be Used at the Next 
System Startup 

To specify a startup configuration file to be used at the next system startup: 

z

 

Use the 

save

 command. If you save the running configuration to the specified configuration file in 

the interactive mode, the system automatically sets the file as the startup configuration file to be 

used at the next system startup (for a device supporting main/backup startup configuration file, the 

system sets the file as the main startup configuration file to be used at the next system startup). 

z

 

Use the command dedicated to specify a startup configuration file to be used at the next startup, 

which is described in the following table: 

Follow the step below to specify a startup configuration file to be used at the next startup (On the 

SR6604/6608/6616 router): 

To do… 

Use the command… 

Remarks 

Specify a startup configuration file 
to be used at the next startup 

startup

 

saved-configuration

 

cfgfile 

backup

 | 

main

 ]

 

Required 

Available in user view 

 

Follow the step below to specify a startup configuration file to be used at the next startup (On the 

SR6604/6608/6616 router): 

To do… 

Use the command… 

Remarks 

Specify a startup configuration file 
to be used at the next startup of the 
AMB and SMB 

startup

 

saved-configuration

 

cfgfile 

backup

 | 

main

 ]

 

Required 

Available in user view 

 

Summary of Contents for SR6600 SPE-FWM

























































































































































































Reviews: