13-160
To do…
Use the command…
Remarks
time timeID at
time1 date
command
command
time
timeID
{
one-off
|
repeating
}
at
time1
[
month-date
month-day
|
week-day
week-daylist
]
command command
Bind the execution time with the
commands in the task, that is,
configure the time to execute the
commands in the task
time
timeID
{
one-off
|
repeating
}
delay
time2
command command
Required
Use any of the commands.
z
Only one view can be specified for a task, which means all commands in the task are executed in
the same specified view. If different views are specified by executing the
view
view-name
command repeatedly, only the last configuration takes effect.
z
The view must be currently supported by the system, with its name specified using its complete
format but not an abbreviation. Most commonly used view names include:
monitor
for user view,
system
for system view,
GigabitEtherentx/x/x
for Ethernet interface view, and
Vlan-interfacex
for VLAN interface view.
z
timeID
is used to uniquely identify the binding between a command and its execution time. A
scheduled task can contain up to 10 commands.
z
The command specified by the
command
command
argument must be a command that can be
executed in the view specified by the
view
view-name
command; otherwise this command cannot
be automatically executed. Therefore, ensure the correctness of the configuration.
Hot-Swapping a Card
To install a hot swappable card on a device, you can insert it into a slot of the device directly.
When the device is running, you can use the following command to unmount a hot swappable card, and
then remove it:
Follow the step to unmount a hot swappable card:
To do…
Use the command…
Remarks
A centralized
device
remove
slot slot-number
Optional
Available in user view.
Unmount a hot
swappable card
or its sub card
A distributed
device
remove
slot slot-number
[
subslot
subslot-number
]
Optional
Available in user view,
Summary of Contents for SR6600 SPE-FWM
Page 112: ...6 101...
