12-138
Patch Status
Each patch has its status, which can be switched only by commands. The relationship between patch
state changes and command actions is shown in
. The patch can be in the state of IDLE,
DEACTIVE, ACTIVE, and RUNNING. Load, run temporarily, confirm running, stop running, delete,
install, and uninstall represent operations, corresponding to commands of
patch load
,
patch active
,
patch run
,
patch deactive
,
patch delete
,
patch install
, and
undo patch install
. For example, if you
execute the
patch active
command for the patches in the DEACTIVE state, the patches turn to the
ACTIVE state.
Figure 12-1
Relationship between patch state changes and command actions
Information about patch states is saved in file
patchstate
on the CF card. It is recommended not to
operate this file.
IDLE state
Patches in the IDLE state are not loaded. You cannot install or run the patches, as shown in
(suppose the memory patch area can load up to eight patches).
Summary of Contents for SR6600 SPE-FWM
Page 112: ...6 101...
