H3C SR6600 SPE-FWM Fundamentals Configuration Manual Download

Page: 111 / 184

6-100

# Upload the configuration file

newest.bin

to the root directory of the storage medium on the AMB.

ftp> put newest.bin

ftp> bye

You can take the same steps to upgrade configuration file with FTP. When upgrading the

configuration file with FTP, put the new file under the root directory of the storage medium (For a

device that has been partitioned, the configuration file must be saved on the first partition.).

After you finish upgrading the Boot ROM program through FTP, you must execute the

bootrom

update

command to upgrade the Boot ROM.

3) Upgrade

Device

# Copy the boot file

newest.bin

to the root directory of the storage medium on the SMB (in slot 1).

<Sysname> copy newest.bin slot1#cfa0:/

# Specify

newest.bin

as the main boot file to be used at the next startup.

Specify

newest.bin

as the main boot file to be used at the next startup for the AMB.

<Sysname> boot-loader file newest.bin slot 0 main

This command will set the boot file of the specified board. Continue? [Y/N]:y

The specified file will be used as the main boot file at the next reboot on slot 0!

Specify

newest.bin

as the main boot file to be used at the next startup for the SMB (in slot 1).

<Sysname> boot-loader file slot1#cfa0:/newest.bin slot 1 main

This command will set the boot file of the specified board. Continue? [Y/N]:y

The specified file will be used as the main boot file at the next reboot on slot 1!

# Reboot the device and the boot file is updated at the system reboot.

<Sysname> reboot

The boot file used for the next startup must be saved under the root directory of the storage medium

(For a device that has been partitioned, the boot file must be saved on the first partition). You can copy

or move a file to the root directory of the storage medium. For the details of the

boot-loader

command,

see

Software Upgrade

in the

Fundamentals Command Reference

Displaying and Maintaining FTP

To do…

Use the command…

Remarks

Display the configuration of the FTP client

display ftp client configuration

Available in any view

Display the configuration of the FTP server

display ftp-server

Available in any view

Display detailed information about
logged-in FTP users

display ftp-user

Available in any view

Summary of Contents for SR6600 SPE-FWM

























































































































































































Search results

Summary of Contents for SR6600 SPE-FWM

Reviews:

Related manuals for SR6600 SPE-FWM

Brands by name

Popular brands

H3C SR6600 SPE-FWM, Fundamentals Configuration Manual

Search results

Summary of Contents for SR6600 SPE-FWM

Reviews:

Related manuals for SR6600 SPE-FWM

Brands by name

Popular brands