H3C SR6600 SPE-FWM, Fundamentals Configuration Manual

Page: 63 / 184

3-52
AUX port login authentication changes do not take effect until you exit the CLI and log in again.
Configuring None Authentication for AUX Login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the AUX port with password authentication and have
user privilege level 0 after login. For how to log in to the device with default configuration, see
Configuration Requirements .
Configuration procedure
Follow these steps to configure none authentication for AUX login:
To do… Use the command… Remarks
Enters system view system-view —
Enter one or more AUX user
interface view user-interface aux first - number
[ last-number ]
—
Specify the none authentication
mode
authentication-mode none
Required
By default, password
authentication is performed for
users that log in through the AUX
port.
Configure common settings for
AUX login
—
Optional
See Configuring Common Settings
for AUX Login (Optional) .
After the configuration, when you log in to the device through the AUX port at the next time, you are
prompted to press enter. A prompt such as <H3C> appears after you press Enter , as shown in Figure
3-17 .
Figure 3-17 Configuration page