3-62
Figure 3-24
Configuration page
Step4
Execute commands to configure the device or check the running status of the device. To get help,
type
?
.
Logging In Through Modems
Introduction
The administrator can use two modems to remotely maintain a device through its AUX port over the
Public Switched Telephone Network (PSTN) when the IP network connection is broken.
This section includes these topics:
z
z
z
Modem Login Authentication Modes
z
Configuring None Authentication for Modem Login
z
Configuring Password Authentication for Modem Login
z
Configuring Scheme Authentication for Modem Login
z
Configuring Common Settings for Modem Login (Optional)
Configuration Requirements
By default, no authentication is needed when you log in through modems, and the default user privilege
level is 3.
To use this method, perform necessary configurations at both the device side and administrator side.
The following table shows the configuration requirements of remote login through AUX port by using
modem dial-in:
Object
Requirement
The PC is correctly connected to the modem.
Administrator side
The modem is connected to a telephone cable that works normally.
Summary of Contents for SR6600 SPE-FWM
Page 112: ...6 101...
