H3C S5500-SI Series, Operation Manual

Page: 328 / 1217

1-4
Network requirements
To detect the reachability of a static route's nexthop through a Track entry, you need to create a Track
first. For detailed Track configuration procedure, refer to Track Configuration in the High Availability
Volume .
Configuration procedure
Follow these steps to detect the reachability of a static route's nexthop through Track:
To do… Use the command… Remarks
Enter system view system-view —
Associate the static
route with a track entry
ip route-static dest-address { mask | mask-length }
next-hop-address track track-entry-number [ preference
preference-value ] [ tag tag-value ] [ description
description-text ]
Required
Not
configured by
default
z
To configure this feature for an existing static route, simply associate the static route with a track
entry. For a non-existent static route, configure it and associate it with a Track entry.
z
If a static route needs route recursion, the associated track entry must monitor the nexthop of the
recursive route instead of that of the static route; otherwise, a valid route may be mistakenly
considered invalid.
Displaying and Maintaining Static Routes
To do… Use the command… Remarks
Display the current
configuration information
display current-configuration
Display the brief information of
the IP routing table
display ip routing-table
Display the detailed
information of the IP routing
table
display ip routing-table verbose
View information of static
routes display ip routing-table protocol static
[ inactive | verbose ]
Available in any
view
Delete all the static routes delete static-routes all
Available In
system view