H3C S5500-SI Series, Operation Manual

Page: 1005 / 1217

1-6
When you format a storage medium, all the files stored on it are erased and cannot be restored. In
particular, if there is a startup configuration file on the storage medium, formatting the storage medium
results in loss of the startup configuration file.
Setting File System Prompt Modes
The file system provides the following two prompt modes:
z
alert : In this mode, the system warns you about operations that may bring undesirable
consequences such as file corruption or data loss.
z
quiet : In this mode, the system does not prompt confirmation for any operation.
To prevent undesirable consequence resulting from misoperations, the alert mode is preferred.
To do… Use the command… Remarks
Enter system view system-view —
Set the operation prompt mode
of the file system
file prompt { alert | quiet }
Optional
The default is alert .
File System Operations Example
# Display the files and the subdirectories under the current directory.
<Sysname> dir
Directory of flash:/
0 drw- - Feb 16 2006 11:45:36 logfile
1 -rw- 1218 Feb 16 2006 11:46:19 config.cfg
2 drw- - Feb 16 2006 15:20:27 test
3 -rw- 8066003 Feb 16 2006 15:30:20 aaa.bin
15240 KB total (2521 KB free)
# Create a new folder called mytest under the test directory.
<Sysname> cd test
<Sysname> mkdir mytest
%Created dir flash:/test/mytest.
# Display the current working directory.
<Sysname> pwd
flash:/test
# Display the files and the subdirectories under the test directory.
<Sysname> dir
Directory of flash:/test/