H3C S5500-SI Series, Operation Manual

Page: 1040 / 1217

1-4
To do… Use the command… Remarks
Configure the maximum size of
an SNMP packet that can be
received or sent by an SNMP
agent
snmp-agent packet max-size
byte - count
Optional
1,500 bytes by default
Configure the engine ID for a
local SNMP agent snmp-agent local-engineid
engineid
Optional
Company ID and device ID by
default
Create or update the MIB view
content for an SNMP agent
snmp-agent mib-view
{ excluded | included }
view - name oid - tree [ mask
mask-value ]
Optional
MIB view name is ViewDefault
and OID is 1 by default.
Follow these steps to configure SNMPv1 and SNMPv2c:
To do… Use the command… Remarks
Enter system view system-view —
Enable SNMP agent snmp-agent
Optional
Disabled by default
You can enable SNMP agent
through this command or any
commands that begin with
snmp-agent .
Configure SNMP agent system
information
snmp-agent sys-info
{ contact sys-contact |
location sys-location | version
{ { v1 | v2c | v3 }* | all } }
Required
The defaults are as follows:
Hangzhou H3C Tech. Co., Ltd.
for contact,
Hangzhou China for location
and SNMP v3 for the version.
Configur
e
directly
Create
an
SNMP
commun
ity snmp-agent community
{ read | write }
community - name [ acl
acl-number | mib-view
view-name ]*
Configur
e an
SNMP
group
snmp-agent group { v1 | v2c }
group-name [ read-view
read-view ] [ write-view
write-view ] [ notify-view
notify-view ] [ acl acl-number ]
Configur
e SNMP
NMS
access
right
Configur
e
indirectl
y
Add a
new
user to
an
SNMP
group
snmp-agent usm-user { v1 |
v2c } user-name group-name
[ acl acl-number ]
Use either approach.
Both commands can be used to
configure SNMP NMS access
rights. The second command
was introduced to be
compatible with SNMPv3.
The community name
configured on NMS should be
consistent with the username
configured on the agent.
Configure the maximum size of
an SNMP packet that can be
received or sent by an SNMP
agent
snmp-agent packet max-size
byte - count
Optional
1500 bytes by default
Configure the engine ID for a
local SNMP agent snmp-agent local-engineid
engineid
Optional
Company ID and device ID by
default