LCR-6000 Series User Manual
53
In the [MEAS SETUP] Page, you can configure each of
the following measurement controls with the cursor
placed in the corresponding field.
Measurement Function [FUNC]
*1
Impedance range [RANGE]
*1
Test Frequency [FREQ]
*1
Trigger Mode [TRIG]
*1
Test Signal Voltage Level [LEVEL]
*1
Measurement Speed [SPEED]
*1
Source Output Impedance [SRC RES]
Averaging Factor [AVG]
DC Bias Voltage [BIAS]
Auto LCZ Function [AUTO LCZ]
Monitor 1 and Monitor 2 Parameter Select [MON 1]
[MON 2]
Measurement Delay Time [DELAY]
Auto Level Control [ALC]
NOTE
*1. These six settings can be set in the
[ MEAS DISPLAY] page and the [ BIN COUNT]
page. Please refer to section 4.1 [MEAS DISPLAY]
Page on page 24 for details.