GVS CHTF-10.1/20.1.2 Series User Manual Download Page 81

Page: 81 / 101

K-BUS

KNX/EIB 3.5/5.0/10.1 inch Touch Panel Plus

○

7.2 Communication object“General sensor”

Fig.7.2 “General sensor”communication object

No.

Function

Name

Data Type Flags

DPT

365

Actual temperature

Internal sensor

2Byte

C,R,T

9.001 temperature

The communication object is used to send the temperature value of internal sensor to the bus.The

value ranges:-50~99.8

℃

366

Temperature

External sensor

2Byte

C,W,T,U

9.001 temperature

The communication object is used to send the temperature value which is sent from the bus.The

value ranges:-50~99.8

℃

367

AQI

External sensor

2byte

C,W,T,U

7.001 pulses

The communication object is used to receive the AQI value from the bus and update it to the

panel.The value ranges:0~500

Note:

Currently the object is reserved.

368

PM2.5

External sensor

2byte

C,W,T,U

7.001 pulses

The communication object is used to receive the PM2.5 value from the bus and update it to the

panel.Unit is ug/m

The value ranges:0~999ug/m

Note:

Currently the object is reserved.

369

PM10

External sensor

2byte

C,W,T,U

7.001 pulses

The communication object is used to receive the PM10 value from the bus and update it to the

panel.Unit is ug/m

The value ranges:0~999ug/m

Note:

Currently the object is reserved.

370

Humidity

External sensor

2byte

C,W,T,U

9.007 humidity

The communication object is used to receive the humidity value from humidity sensor in the bus.

The value ranges:0~100%

Note:

Currently the object is reserved.

371

VOC

External sensor

2byte

C,W,T,U

The communication object is used to receive the VOC value from the bus and update it to the

panel.Unit is mg/m

The value ranges:0~9.99mg/m

Note:

Currently the object is reserved.

372

CO2

External sensor

2byte

C,W,T,U

9.008

DPT_Value_AirQuality

The communication object is used to receive the CO2 value from the bus and update it to the

panel.Unit is ppm The value ranges:0~4000ppm.

Note:

Currently the object is reserved.

Summary of Contents for CHTF-10.1/20.1.2 Series






































































































Search results

Summary of Contents for CHTF-10.1/20.1.2 Series

Reviews:

Related manuals for CHTF-10.1/20.1.2 Series

Brands by name

Popular brands

GVS CHTF-10.1/20.1.2 Series, User Manual

Search results

Summary of Contents for CHTF-10.1/20.1.2 Series

Reviews:

Related manuals for CHTF-10.1/20.1.2 Series

Brands by name

Popular brands