K-BUS
KNX/EIB 3.5/5.0/10.1 inch Touch Panel Plus
13
○
R
Supports manual switching of heating/cooling control, three-speed wind speed plus automatic wind speed
can be adjusted, four kinds of room work modes: comfortable, standby, night and protection mode.
Temperature settings support absolute and relative settings, as well as adjustable temperature range
settings. Supports two points and PI control.
Background music control
Used to control background music playback, such as power on/off, play/pause, previous/next, volume
up/down, mute, play mode, and audio source.
Air conditioning control
There are two types of air-conditioning control: split infrared control and air-conditioning gateway.
The split infrared function control is similar to the function on the air conditioner remote control. This function
of the panel is to control the air conditioner through the infrared transmitting module on the bus, for example, the
panel sends a control message to the infrared transmitting module, the infrared transmitting module and the
message The given function code is transmitted to the air conditioner to control the air conditioning switch, mode,
air volume and so on.
The air-conditioning gateway control is suitable for controlling, for example, a VRV air-conditioning system,
and needs to be controlled with the KNX to VRV air-conditioning gateway.
RGB dimming
Mainly for dimming RGB LED lights, using absolute dimming.
Floor heating control
Two-point control method is used to automatically switch the floor heating according to the temperature
difference. In addition, the warm scene and timing functions can be set, and the temperature range can be
adjusted.
Fresh air control
Supports three wind speed adjustments, on/off heat exchange, filter life count, filter timeout alarm, filter
reset.
Automatic control according to PM2.5 or CO2 concentration, in addition to setting the scene function.
Timing function
Timing values can send different types of data, provides up to eight timing control.
Event group function
By calling the scene number, eight output messages can be triggered. Each output has three different data
types to choose from. There are 4 sets of event functions available for setting.
Logical function
Supports 8 logic inputs with sum, phase, and XOR; supports logic gate forwarding, and can forward one
input to one output or multiple outputs;
Supports threshold comparators and conversions between different data types. There are 8 logic functions
to set.