K-BUS
KNX/EIB 3.5/5.0/10.1 inch Touch Panel Plus
74
○
R
Normally the input value is the same with the output value.But according to the options,one input can have 1
or more outputs.
Note:
before operation,the logic gate scene No.should be activated,or the default scene will be activated.
6.8.3 “Threshold comparator”function parameter
Fig.6.8_4“Logic function -- Threshold comparator”parameter setting window
Parameter“Threshold value data byte”
This parameter is used to set the threshold value data type.The options are:
4bit
1byte
2byte
4byte
Parameter“Threshold value....”
This parameter is used to set the threshold value.The range is determined by the data type. 4bit 0..15/1byte
0..255/ 2byte 0..65535 /4byte 0..4294967295
Parameter“If Object value<Threshold value”
Parameter“If Object value=Threshold value”
Parameter“If Object value!=Threshold value”
Parameter“If Object value>Threshold value”
Parameter“If Object value<=Threshold value”
Parameter“If Object value>=Threshold value”
