GVS CHTF-10.1/20.1.2 Series User Manual Download Page 23

Page: 23 / 101

K-BUS

KNX/EIB 3.5/5.0/10.1 inch Touch Panel Plus

○

1/0 (on/off) via the object Power on/off.

In the IR Split Unit control mode, touch this button and the device will send a corresponding command

message according to the database configuration through the object IR Split unit command.

If the startup mode is heating or cooling mode, only the corresponding temperature control command

message will be sent out. At startup, the corresponding mode, temperature setting, and wind speed will be
displayed according to the database configuration.

②

AC Mode

The heating, cooling, dehumidification, and air supply modes for selecting the air conditioner can be updated

by the object.

③

Wind speed

Touch this icon, and the wind speed will be switched from 1 to 1 AUTO...1 from the current wind speed level.

In the Gateway Integrate control mode, the boot wind speed does not change; in the IR Split Unit control

mode, the boot displays the corresponding wind speed profile according to the configuration.

④

Temperature display

Touch

icons, the display can be switched between the room temperature and the outdoor

temperature.

Units can be selected based on the configuration of the database Temperature display units, select Celsius

(°C) or Fahrenheit (°F) to display.

⑤

Set temperature adjustment

The touch icon will be +/- 1°C above the current temperature and send a corresponding message on the

bus.

The adjustment range for setting the temperature is limited to 16-32°C by default and can be modified by the

database "Min./Max. set temperature [16...32]°C". In the dehumidification and air supply mode, the set
temperature is not adjustable.

5.6 Background music feature page

Figure 5.6_1

①

On/off button

Touching this button will send the value 1/0 (on/off) message through the object Power on/off.

①

②

③

④

⑤

⑥

Summary of Contents for CHTF-10.1/20.1.2 Series






































































































Search results

Summary of Contents for CHTF-10.1/20.1.2 Series

Reviews:

Related manuals for CHTF-10.1/20.1.2 Series

Brands by name

Popular brands

GVS CHTF-10.1/20.1.2 Series, User Manual

Search results

Summary of Contents for CHTF-10.1/20.1.2 Series

Reviews:

Related manuals for CHTF-10.1/20.1.2 Series

Brands by name

Popular brands