K-BUS
KNX/EIB 3.5/5.0/10.1 inch Touch Panel Plus
28
○
R
Parameter“Temperature display units”
To set the temperature display units. Options:
Celsius (
℃
)
Fahrenheit (
℉
)
Parameter“Time display format”
To set the time display format of the screen, which is a 12-hour clock (with morning/afternoon supplementary
display), or a 24-hour clock. Options:
12 H *
24 H
NOTE: The 3.5/5.0/10.1 inch Touch Panel supports 24H only temporally.
Parameter“Buzzer indicate when operation (0..10,0=inactive)”
To set whether the buzzer sounds when the touch screen is operated. Available Options: 0..10
To set the volume of the prompt tone. 0 is no sound, 1 is the minimum tone, and 10 is the maximum tone.
NOTE: The 10.1 inch Touch Panel does not supports the operation tone adjustment, it is fixed.
Parameter“The delay from sub page back to main page[0..255]*1s*”
This parameter is to set the delay time to automatically return to the homepage when there is no operation
detected under the function page. Available Options: 0..255s
NOTE: The 3.5/5.0/10.1 inch Touch Panel doesn’t support this function temporally.
Parameter“Screen saver”
To set whether to enable the screen saver function of the touch panel. Options:
Disable
Clock
Album
If you select “Clock”,the screen shows the clock when the panel enters to screen saver mode.
If “Album” is selected, after entering the screen saver mode, the screen displays the picture in the “picture”
folder of the album in the TF card. If the panel does not detect the existence of the album “picture” in the TF
card, the screen saver will display the pictures in the program.
Note: Support picture format: pictures with suffixes of .jpg, .bmp, and .tjpg.
If "Disable" is selected, the screen saver function is disabled.
——Parameter“Delay time for screen saver [5..255]*1s”
This parameter sets the delay time for entering the screen saver mode, countdown starts from the last
operation of the screen. Options: 5..255
Parameter“Delay time for turn off backlight[0..255]*1s”
This parameter sets the delay time for turning off the screen backlight and countdown starts from the touch
