K-BUS
KNX/EIB 3.5/5.0/10.1 inch Touch Panel Plus
40
○
R
6.4.3 Parameter“Page x--HVAC”
The Parameter“HVAC”setting interface shown in Figure 6.4_4
，
mainly sets the parameters of the fan and
some of the HVAC parameters..
HVAC The general parameters of the controller also need to refer to the "controller-general" parameter
setting interface.
Figure 6.4_4 Parameter“HVAC”setting interface
Parameter“Temperature reference from”
This parameter sets the source of the HVAC function temperature reference. Available options:
：
Internal sensor
External sensor
When selecting the reference internal sensor, the temperature is determined by the setting of the built-in
sensor for the "General sensor " of the parameter interface.
