![background image](http://html1.mh-extra.com/html/gvs/chtf-10-1-20-1-2-series/chtf-10-1-20-1-2-series_user-manual_2279963041.webp)
K-BUS
KNX/EIB 3.5/5.0/10.1 inch Touch Panel Plus
38
○
R
In general, the "brightness dimming" and "brightness Status" objects are used in conjunction.
For example, "brightness dimming" corresponds to the brightness dimming object of the dimmer, "brightness
status" corresponds to the Brightness state object of the dimmer.
Value send: value forwarding feature, which specifies the values that send different data types.
Curtain with 3 Button--Open/Close/Stop
:
pply to shutter control, with three control buttons: Open, close,
stop.
This type of control also applies to the lifting curtain control. Message value: Up / open corresponding
message "0", bottom / close corresponding message "1"
Curtain with 1 Slider-Move Percent
:
apply to shutter control, with a sliding bar, as a percentage of the
curtain position adjustment.
Curtain with 2 sliders-Move/Adj Percent
:
Apply to Venetian blinds control, with two slider, adjust the
curtain position and Venetian angle in percentage form.
The following parameters are visible when you select a value to send feature.
——Parameter“Datatype of object”
This sets the type of object that sends the value. Available options:
:
1bit[On/Off]
2bit[0…3]
4bit[0…15]
1byte[0…255]
1byte[0…100%]
1byte[scene control]
2byte[-32768…32767]
2byte[0…65535]
——Parameter“Output value when press [...]”
Sets the value that the object sends when the action is set, and the range of values is determined by the
selected object type.
——Parameter“Long operation function”
Set whether to enable long operation function. Available options:
:
Disable
Enable
When “Enable”, the following parameters are visible.
——Parameter“Output value when long operation[...]”
The value sent by the object when a long operation is set, and the range of values is determined by the type
of object selected.
Note:
If the value is sent to select the scene type, long operations will be used to save the scene when the
long operation is enabled.