K-BUS
KNX/EIB 3.5/5.0/10.1 inch Touch Panel Plus
30
○
R
6.2 Parameter“General sensor”
Figure 6.2_1 parameter setting of“General sensor”page
To set the parameters related to temperature detection and external sensor detection such as AQI, CO2,
VOC, etc.
This part of the sensor detection value is mainly used to be displayed in the home page of touch panel.
NOTE:
The 3.5/5.0 inch Touch Panel doesn’t support this function temporally.
The following three parameters are used for correction value and sending setting of the screen's
built-in temperature sensor. If other functions choose internal sensors as well, please refer to the
settings here.
——Parameter“Internal sensor calibration”
Options
：
-5
℃
...
0
℃
...
5
℃
This parameter is to set the temperature correction value of the built-in temperature sensor, that is, to modify
the measured value of the built-in temperature sensor to make it closer to the current ambient temperature.
Tip
：
10.1 inch Touch Panel is not built-in the temperature sensor, so the internal sensor setting is invalid.
