
K-BUS
KNX/EIB 3.5/5.0/10.1 inch Touch Panel Plus
37
○
R
Parameter“Icon x
,
x=1…9”
Sets whether to make the function of icon x . Available options
:
Disable
Enable
When“Enable”,several of the following parameters are visible.
——Parameter“Icon number”
Sets the icon to use, and the different icon numbers represent different icons. Available options
:
Default
1 -
Dimmer 1
...
20 -
Music
Default
:
Displays the icon based on the selected feature. The icon for the graph label will be described in the
appendix below.
。
——Parameter“Description for Icon x”
Set the name of icon x that is displayed on the screen, which can be entered up
to 12
characters (Mam 6
Chinese characters ).
Actual maximum display 9 characters (or 4 Chinese characters).
。
——Parameter“Function of Icon x”
Sets the function of the icon x . Available options
:
Switch
Switch/Dimming
Value send
Curtain with 3 Buttons-Open/close/stop
Curtain with 1 Slider-Move Percent
Curtain with 2 sliders-Move/Adj Percent
Switch
:
The
icon is used to control the switch. Object "switch" and object "switch status" are visible, and
these two objects are typically used in conjunction..
For example, "switch" corresponds to the switch actuator's switchingobject, "switch status" corresponds to
the switch state object, if the object "switch status" receives the switch actuator state reply, The icon status is also
updated accordingly (the selected icon must support two states)
.
Switch/Dimming
:
the icon is used for the switch and can be used for dimming.
Object "switch", "brightness dimming" and "brightness Status" are visible, short press action triggers a
switch command A long press operation opens a slide bar for dimming, which slides directly on top to adjust the
light.
。