GVS CHTF-10.1/20.1.2 Series User Manual Download Page 51

Page: 51 / 101

K-BUS

KNX/EIB 3.5/5.0/10.1 inch Touch Panel Plus

○

Play mode output setting
The following parameters define the telegram value and feedback value that are sent to each play mode.

Parameter “Output value for single cycle”

It is to set the output value when single cycle play mode is enabled. Available Options: 0..255

Parameter “Output value for random play”

It is to set the output value when random play mode is enabled. Available Options: 0..255

Parameter “Output value for playlist cycle”

It is to set the output value when playlist cycle play mode is enabled. Available Options: 0..255

Parameter “Output value for play in order”

It is to set the output value when play in order play mode is enabled. Available Options: 0..255

Parameter “Status value for single cycle”

It is to set the status feedback value of single cycle play mode. The screen will update the icon status

according to the received feedback value. Available Options: 0..255

Parameter “Status value for random play”

It is to set the status feedback value of the random play mode, the screen will update the icon status

according to the received feedback value. Available Options: 0..255

Parameter “Status value for playlist cycle”

It is to set the status feedback value of the playlist cycle play mode. The screen will update the icon status

according to the received feedback value. Available Options: 0..255

Parameter “Status value for play in order”

It is to set the status feedback value of the play in order play mode. The screen will update the icon status

according to the received feedback value. Available Options: 0..255

Music source setting
The following parameters define the telegram value and feedback value when switching to each sound

source.

Parameter “Output value for USB”
Parameter “Output value for SD”
Parameter “Output value for AUX”
Parameter “Output value for FM”

It is to set the telegram value sent by each sound source. Available Options: 0..255

Parameter “Status value for USB”
Parameter “Status value for SD”
Parameter “Status value for AUX”
Parameter “Status value for FM”

It is to set the status feedback value of each sound source, and the screen will update the icon status

according to the received feedback value. Available Options: 0..255

Summary of Contents for CHTF-10.1/20.1.2 Series






































































































Search results

Summary of Contents for CHTF-10.1/20.1.2 Series

Reviews:

Related manuals for CHTF-10.1/20.1.2 Series

Brands by name

Popular brands

GVS CHTF-10.1/20.1.2 Series, User Manual

Search results

Summary of Contents for CHTF-10.1/20.1.2 Series

Reviews:

Related manuals for CHTF-10.1/20.1.2 Series

Brands by name

Popular brands