27
CoboSafe-CBSF
325-2810-012US15
PREPARING FOR MEASUREMENT
Fig. 14: Example: Robot with rail framework for mounting the assembly adapter
10.4
Robot Parameters
NOTICE
Set robot parameters
Material damage due to high collision speeds, forces and pres-
sures!
■
Only combine measurement units as described in this
manual.
■
Carefully plan collisions and document the planning.
■
Design collision kinematics carefully and iteratively.
■
Always test at greatly reduced speeds first.
■
Then slowly increase the speeds.
■
Finally, achieve the intended operating conditions at the
collaboration workstation.
If the robot exceeds the application limits of the force and pressu-
re sensors during the collision, material damage to the measuring
system can result.
Consider robot operation safety settings from ISO/TS 15066.
