13
CoboSafe-CBSF
325-2810-012US15
INFORMATIVE VALUE OF THE MEASUREMENT RESULTS
Inspection Date
A label on the side of the measuring device indicates when the device has to be inspect
and calibrate by the manufacturer. The year printed on the label is the year in which the next
inspection is due. The month is indicated by the circle in which a month can be punched out.
Fig. 5: Label "Inspection Date"
This example shows a sticker that requires calibration in February 2018.
6
Informative Value of the Measurement Results
The informative value of the results is limited exclusively to the specific contact situation
measured. The values shown in the display of the CoboSafe-CBSF are not sufficient for an
evaluation alone. The measured values can only be interpreted completely using the software
CoboSafe-Vision and a pressure measuring process (CoboSafe-Tek or CoboSafe-Scan).
Selection of Measuring Points
Information on the "Selection of measuring points" can be found in the chapter
of the same name in the corresponding document "CoboSafe – General Safety
Instructions".
