PREPARING FOR MEASUREMENT
24
CoboSafe-CBSF
325-2810-012US15
GEFAHR
WARNING
Tilting and falling components
Risk of injury due to tilting and falling components of the measu-
rement setup!
■
Construct the measuring setup with care.
■
If the setup with one person is not safely possible, get a
second person to help.
■
Wear personal protective equipment.
Hard and heavy components (e.g., aluminum profiles) are often
handled and joined while the measurement setup is being estab-
lished. Until these components are firmly connected, they can tilt
or fall, causing severe crushing and impact injuries.
CAUTION
Clamping point
The clamping point is located in the red area between measu-
ring surface and measuring body.
■
The force sensor must be held in position during the measu-
rement by means of a mounting adapter.
The force sensor must not be fixed manually during the measuring
process, otherwise there is a risk of crushing. During the measure-
ment, e.g., fingers can be squeezed in this area.
Clamping
Point
Fig. 13: Clamping point
