39
CoboSafe-CBSF
325-2810-012US15
MAINTAINING FUNCTIONALITy
13.3
Recharging Batteries
The specifications of the charger can be found in the manufacturer's documents and on the
type plate. If the specification does not correspond to the country-specific specifications and
designs, the charger must be replaced. The technical data for charging voltage and maximum
charging current must be observed.
Battery charging can be performed using the following options:
■
Charging by charger. The specifications can be found in the technical data.
■
Charging via the USB port of the PC.
13.4
Replacing Batteries
The battery cannot be replaced by the operator. In the course of annual calibration by the
manufacturer, the batteries and their charging cycles are checked and replaced if necessary.
Batteries are replaced at the latest every two years.
13.5 Calibration
Calibration of the force sensors is necessary to ensure the measuring capability of the system.
To have the measuring system calibrated, contact customer service. Customer service can
name a contact person for you or coordinate the next steps.
The measuring system can be mailed to the manufacturer to have it calibrated
13.5.1 CoboSafe-CBSF Inspection Date
A label on the device indicates when the force measuring device has to be inspected and
calibrated by the manufacturer; refer to
chapter “Signs and Labels” (inspection date).
13.5.2
Calibration by a Certified Laboratory
The force measuring device can be calibrated by a lab accredited according to DIN EN ISO/
IEC 17025.
We recommend having calibration performed by the manufacturer.
The calibration of the measuring unit for temperature and humidity is not possible.
