background image

The SDPC1 Pro Click Metronome is a powerful rhythm producer, capable of creating a wide range of 
sounds and tempos for the professional drummer. Here are its specific functions:

• 

Tempo: 30-280 BPM

• 

Beat: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9

• 

Rhythm Types: 

• 

Main Volume: Controlled via the Master Volume knob.

• 

Main Rhythm: Controlled via several Rhythm knobs.

• 

Timbres: Metro1 and Metro2 each have preset timbres, while Metro3 (in advanced mode) gives you 
the option of programming your own timbre from 10 unique options.

• 

Two LED lights:  Each light shows a red color for an accented beat, or green color for all other beats.

• 

Metronome: Audible via clicks or human voice.

• 

Timer Function: Lasts for up to 90 minutes. When the time has expired, the LED turns red and the speaker 
will beep for one minute; press the 

[START/TAP]

 button to stop.

• 

[START/TAP]

 button: Starts/stops the metronome.

• 

Remote Control Function: Starts/stops the metronome by using a remote control pedal linked to the 
remote control jack. The pedal acts as the 

[START/TAP]

 button.

• 

Sound Signal: After connecting to a Line Out jack, the sound signal can now be sent to an amplifier.

• 

Tap Tempo Function: Tap the 

[START/TAP]

 button while in your tempo, as the tempo of your tapping 

will reveal itself in the LCD Display. Tempo ranges from 30-280 beats/min.

• 

Variation Function: Set up to four sections of rhythm variation, freeing up the beat, tempo, and bars in 
each section. Press the 

[START/TAP]

 button to begin the sequence demonstration.

• 

Programming Function: You can program/store your own rhythm by setting a beat, tempo, and timbre 
(while Prog00 is a fixed rhythm, Progs1-31 are available).

Operation Overview

Congratulations on your purchase of Simmons’ SDPC1 Pro Click Metronome. It is recommended that 
you read this manual once through to get a feel for the unit, and refer to back to it when necessary.

1

PRO CLICK

SDPC1

SDPC1

Pro Click Metronome

www.simmonsdrums.net

Summary of Contents for SDPC1

Page 1: ...ronome Remote Control Function Starts stops the metronome by using a remote control pedal linked to the remote control jack The pedal acts as the START TAP button Sound Signal After connecting to a Line Out jack the sound signal can now be sent to an amplifier Tap Tempo Function Tap the START TAP button while in your tempo as the tempo of your tapping will reveal itself in the LCD Display Tempo ra...

Page 2: ...o set the Beat type Next turn the Tempo dial to determine your ideal tempo Now press the START TAP button to begin play Timbre Selection Press the MODE button to select your timbre setting Remember Metro1 and Metro2 are the fixed set of timbres while Metro3 is your own timbre set in Advanced mode Rhythm Type Selection Access different rhythms by opening or closing the corresponding rhythm points s...

Page 3: ...ro3 and Tap Metro1 and Metro2 are fixed sets of timbre while Metro3 s timbre can be set by the user Tap is used to measure the tap tempo BEAT button Changes beat types STORE button Short Press Stores the beat tempo and timbre set by the user to Prog1 31 STORE button Long Press Turns the back light on off UP DOWN button Selects and views Progs 1 31 to reset play START TAP button In Metro1 Metro2 Me...

Page 4: ...Liability Retailer and manufacturer shall not be liable for damages based upon inconvenience loss of use of product loss of time interrupted operation or commercial loss or any other incidental or consequential damages including but not limited to lost profits downtime goodwill damage to or replacement of equipment and property and any costs of recovering reprogramming or reproducing any program o...

Reviews: