r3a-x2.0
13
6. Connect the other two ends
of the r3a-ptzcam-rca to your
camera.
c.
The small phone plug
should connect to the
LANC
connector on
your camera (or to the
remote
connector for
Panasonic cameras).
d.
The remaining plug
should connect to the Video plug on your camera. On most
cameras this connector is yellow.
7. Repeat steps 4-6 for any additional
r-THREE
Pan Tilt Heads that
are to be controlled by the
r-THREE
system.
8. Connect the r3a-moncable
to the
Preview Monitor
on front
of the
r-THREE
Interface Box
or attach your monitor to the
Preview BNC on the back of
the interface box.
9. Connect the other end of the
r3a-moncable to the monitor in
two locations -
DC 12V
and
Video In.
For a second monitor, repeat
steps 8 & 9 but plug the r3a-
moncable into
Program
Monitor
on the
r-THREE
Interface Box.
