r3a-x2.0
40
is the only format available at this
time.
o
the Setup Level is
IRE7.5.
This
can be configured to
IRE0.0.
o
the video signals from CamA,
CamB, CamC on the
r-THREE
Interface Box by default are setup
to output the composite signal
from Cam1, Cam2 and Cam3.
These three outputs can be
configured to be
Preview
,
Program
,
Cam1
,
Cam2
or
Cam3
.
Note: you can set the video signals for
each camera individually by selecting
the camera with the Preview buttons -
Cam[1,2,3]
).
Default Color Bars are Off.
Default Dissolve is 30 frames.
Default Video Signal (Brightness, Color,
Hue and Contrast) is +0.
Default Output Config is NTSC, IRE7.5
and Cam[1,2,3] outputs to Cam[A,B,C].
Pan/Tilt configuration allows you to
configure:
•
Responsiveness curve – by default
the Pan/Tilt Joystick will respond in
an exponential manner such that the
more you push the joystick, the
faster it will pan & tilt.
Fixed
Speed
,
Linear Speed
as well as
other Exponential
Curves
1-9 can be
configured.
(see Table 2 & 3 below for
further details).
