r3a-x2.0
46
CAM MODE
Press the MODE Button until the CAM light is on. This puts
the system in CAM MODE. The Display will initially look
like:
Using the Menu Knob when in CAM MODE:
1.
Use the Menu Knob to find the Camera Command
that you wish to remotely control on the current
Preview camera. See Table 4 - LANC Camera
Commands. (e.g.
Camera Commands Display
)
2.
Select the command by pressing the Menu Knob.
3.
If the
Camera Command Display
is on you will likely
see some indication that the mode is on or off. See
your camera manual for details.
You can exit from CAM MODE at any time by pressing the
MODE button.
Table 4 -
LANC Camera
Commands
With
Camera Commands Menu
selected, you will enable the camera
menu on your physical camera. See
the CAM MODE Example on page 39
for additional details and usage.
You must also have
Camera
Commands Display
selected to see
the camera menu on the Preview
Monitor.
