r3a-x2.0
31
r-ONE
Example
Running a One Remote Camera System:
1.
Mount and setup your camera as you normally would for
recording.
2.
Setup cabling & power as described in the
r-ONE
Cabling
section.
3.
You should see a static time code on the
r-THREE
Control
Head Display for your remote camera.
4.
If the CAM2 STATUS Light is not blinking green, then
press the Red PWR Button to power on your remote
camera.
The CAM2 STATUS Light should now be blinking
green.
The Preview Monitor connected to the
r-THREE
Control
Head should now display the video signal for your
remote camera.
5.
Next, press the green REC Button to start recording on
your remote camera.
The CAM2 STATUS Light should now be solid green.
The time codes for your remote camera should start to
run on the
r-THREE
Control Head Display.
6.
Now, you can use the right joystick to Zoom in/out and
Focus and the left joystick to Pan/Tilt your remote camera.
