Graseby 3000/500, Manual

Page: 76 / 231

4 — 2 9
G r a s e b y M e d i c a l L t d .
4
3 0 0 0 / 3 1 0 0 a n d 5 0 0 / 5 0 5 S e r v i c e M a n u a l I s s u e A ( A p r i l 2 0 0 2 )
V o l u m e t r i c I n f u s i o n P u m p s
The Service Functions menu allows you to set the date and time on
the pump and to test some pump functions.
Entering the Service Functions menu
To enter this menu, first switch off the pump if it is switched on.
Then, press the Occlusion Alarm Setting key while simultaneously
pressing the On/Off key. When you take your fingers off the keys, the
pump switches on and you are asked to enter the Service Function
menu ID.
Enter the numbers
7557
.
As you enter the digits asterisks (*) are displayed for security
protection. If you make a mistake, you must switch the pump off to
enter the correct ID. When prompted:
Enter the password
3796
.
The password is always 3796 and cannot be changed.
Using the Service Functions menu
When setting up the pump, the main use of this menu is to set the
date and time.
Setting the date
To set the date and time:
1. Enter the service functions menu as described above.
2. Press Options to display the screen:
3. Enter the time and date as a string of numbers in the format
HH:MM:SS MM/DD/YY.
4. Press Options again to display the next parameter. The
parameters on the menu are described on the next page.
Note: If Version 0.71 (or later) software is installed, ‘GMT’ may be hidden, by
disabling the GMT timestamp parameter on the Technician Menu, see
page 4-6.
Leaving the Service Functions menu
Switch off the pump to exit the menu.
About the Service Functions menu