Graseby 3000/500, Manual

Page: 48 / 231

4 — 1
G r a s e b y M e d i c a l L t d .
4
3 0 0 0 / 3 1 0 0 a n d 5 0 0 / 5 0 5 S e r v i c e M a n u a l I s s u e A ( A p r i l 2 0 0 2 )
V o l u m e t r i c I n f u s i o n P u m p s
Volumetric Pump Menus
Which version of software is in the pump?
This manual reflects the menus that are available in Version 0.71
software for the Volumetric pump. A pump has version 0.71 software
(or later) if:
• The Secondary infusion key appears as:
• The Instruction Label on the right hand side of the pump lists
more than eight options.
• The Biomedical Model Number and Software Version menu (see
Biomedical Menu, page 4-11) shows V0.71, for example:
This manual also covers the Version 0.53, Versions 0.63, 0.65, and
0.67 software that may be installed in a Volumetric pump.
Introduction to menus
The menus are decribed in the following sections. However, for
detailed operating procedures refer to the Instruction Manual and
Technical User Manual .
The number of menus (some of which have overlap of features)
available on a pump varies depending on the software installed. The
full set of menus is as follows:
Technician
This menu is only present on pumps with version 0.71 software and
later. You use the Technician menu to enable the features of the
pump that have been introduced with version 0.71 software, as well
as enabling the features that existed in earlier versions.
Biomedical
Available in all software versions. In previous documentation it is
called the “Biomedical Special Functions”. As well as enabling or
disabling features, it displays data for fault finding and calibration.
Service Functions
Contains functions for servicing and setting the time in the pump.
Special Functions
Used to initialise the pump, for example after NV RAM or CPU board
replacements, or any software upgrades. Details of how to use the
Special Functions to initialise the pump vary with the software
version and are explained in Chapter 7, Troubleshooting section.