Graseby 3000/500, Manual

Page: 61 / 231

G r a s e b y M e d i c a l L t d .
4 — 1 4
4
I s s u e A ( A p r i l 2 0 0 2 ) 3 0 0 0 / 3 1 0 0 a n d 5 0 0 / 5 0 5 S e r v i c e M a n u a l
V o l u m e t r i c I n f u s i o n P u m p s
43 Service Due Alarm.
44 Secondary Stop Alarm
45 Preset Limits Exceeded Alarm.
62 Computer Interface Event.
63 Time Change Event.
64 On HOLD Alarm.
65 Stop pumping - Occlusion.
66 Stop pumping - Air.
67 Stop pumping - No flow above pump.
68 Stop pumping - Door Open.
69 Stop pumping - Loading problem, Pressure Plate.
70 Status of pump - Low Battery (11.0 < = voltage < 11.6).
71 Stop pumping - Dead Battery (voltage < 11.0 volts).
72 Stop pumping - Safety Clip.
73 Change rate to KVO.
74 Running rate change not completed.
75 On battery (loss of main power).
76 Start pumping using RUN key.
77 Stop pumping using HOLD key.
78 Secondary to primary switch.
79 Occlusion Alarm Setting change to low.
80 Occlusion Alarm Setting change to medium.
81 Occlusion Alarm Setting change to high.
82 Running rate change.
83 rate change.
84 Taper to new rate.
85 Power down.
86 Pump on Battery.
87 Turn off AC.
88 Turn on AC.
89 Motor reverse stall.
90 Power change - battery to AC.
91 Dose change not completed.
92 Dose change not accepted.
93 Dose-Rate Calculation setup.
94 Dose field overflow.
95 Volume Over Time setup.
96 Dose-Rate Calculation setup not completed.
97 Door has been opened.
98 Pause pumping - excess pressure detected (software
revision 0.64 and higher).
99 Resume pumping - pressure reduced (software revision
0.64 and higher).
Code Meaning
System state codes, continued