Graseby 3000/500, Manual

Page: 54 / 231

4 — 7
G r a s e b y M e d i c a l L t d .
4
3 0 0 0 / 3 1 0 0 a n d 5 0 0 / 5 0 5 S e r v i c e M a n u a l I s s u e A ( A p r i l 2 0 0 2 )
V o l u m e t r i c I n f u s i o n P u m p s
Service Date
This parameter is used to set the service due date that is displayed
during power up when the pump is switched on. You can set or clear
the service date when this screen is displayed with the date flashing
on the Technician Menu:
Enter the new date in the format MM/DD/YY
To disable the Service Date feature, set the month, day and year to
zeroes.
When the pump is switched on, if the date set is reached or exceeded,
then an alarm is sounded and the following message is displayed:
to notify the user that the pump should be serviced.
Micrograms
Use this feature to determine the units to be displayed as µg or mcg
for the Dose-Rate Calculation. If you are not enabling Dose rate
calculation, you can ignore this item.
Note: Since the pump does not confirm the chosen unit display, test that the
display is set correctly. Switch the pump on normally and press the
Options key until the Message Display asks you to set the Dose-Rate
calculation. Then press * to examine the next screen.