![Graseby 3000/500 Manual Download Page 122](http://html1.mh-extra.com/html/graseby/3000-500/3000-500_manual_2257430122.webp)
G r a s e b y M e d i c a l L t d .
7 — 2 6
I s s u e A ( A p r i l 2 0 0 2 )
3 0 0 0 / 3 1 0 0 a n d 5 0 0 / 5 0 5 S e r v i c e M a n u a l
V o l u m e t r i c I n f u s i o n P u m p s
7
CPU board initialisation for Version 0.53 software
continued
Press the
Options
key once and enter the start-up parameters.
Using the
1
▼
and
3
▲
keys, enter and confirm the following
parameters:
PRESSURE SAMPLE START = 15
BACK-OFF PRESSURE = 20
After entering Back-Off pressure:
Press the
Options
key once and check the TIME and DATE. Enter a
new time and date if necessary (set time to GMT) using the numeric
key pad.
Press the
Options
key twice and set RATE CALIBRATE to 0.0%
using the up arrow (1) and down arrow (3) keys.
Press the
Options
key 5 times to display the PUMP ID (serial
number) screen. Enter the serial number as follows:
Press the * key first, then use the numeric keypad to enter
3000 followed by the serial number.
Press the
Options
key once to display the CLEAR PUMP HISTORY
screen. Press the * key twice to clear the pump history.
Switch off the pump.
Pump initialisation is now complete.
CPU board initialisation for Version 0.63 software
Follow these instructions for initialising a pump fitted with version
0.63 software only
.
Connect the pump to the AC Mains supply
Hold down the Period Key (.) and press
On
Enter ID: 7-7-7-Run-Run-Run
Password: 2-1-2-1
Press
Options
key three times to get the following screen:
"Press * to Enable SI keys"
Press the * key once and ensure resulting screen reads:
"Press * to Disable SI Keys"
Switch off the pump.
Continued ...
Summary of Contents for 3000/500
