Graseby 3000/500, Manual

Page: 57 / 231

G r a s e b y M e d i c a l L t d .
4 — 1 0
4
I s s u e A ( A p r i l 2 0 0 2 ) 3 0 0 0 / 3 1 0 0 a n d 5 0 0 / 5 0 5 S e r v i c e M a n u a l
V o l u m e t r i c I n f u s i o n P u m p s
Screen Use Notes/see page ...
0 Two snapshot screens See About snapshot screens,
are available: a and b. page 4-12.
Press * to toggle between
the two screens.
1 Time and date display. See the Service Functions
GMT shown if enabled on Menu, page 4-23
the Technician menu.
2 The display shows: See page 4-23.
• cumulative running hours,
• cumulative volume,
• number of loading cycles.
3 Cumulative hours that the See page 4-23.
pump has been:
• used on AC mains whilst
switched on,
• charging: plugged in but
switched off,
• used on batteries.
4 Allows you to run a See page 4-24.
calibration test.
5 Shows the current rate Rates of 300, 600, 1200, 2400 and
setting of the serial port. are available. See page 4-25.
6 Displays the language Only one language is
installed in the pump. supplied in a pump.
7 Displays the number of Use the scroll keys (1 and 3)
times a pump was usedto change the d isplayed
on battery for the number number of hours.
of hours indicated. See page 4-25.
8 Displays the model See page 4-26.
number and software
revision.
9 Use this screen to test See page 4-26.
the alarms by pressing
1, 2 and 3 on the keypad
10 Rate Taper Enable or Disable. See Technician menu.
11 Volume Over Time Enable or Disable. See Technician menu.
12 Dose Rate Calculation Enable or Disable. See Technician menu.
Summary of Biomedical menu parameters
The numbers in the left hand column of this table indicate the
number of Options key presses to reach the parameter.