![background image](http://html.mh-extra.com/html/goulds-pumps/xhd/xhd_installation-operation-and-maintenance-manual_2247661098.webp)
1.
Support the suction half casing (100A) with a hoist hook through the lifting lug. Tension the hoist
properly so the sub-assembly will be fully supported upon disengagement.
2.
Remove the casing hex head nuts (600C) and flat washers (553) from the casing hex head bolts
(600A) and tapered alignment studs (600D).
3.
Leave the tapered alignment studs (600D) secured in place. The studs will provide guidance in re-
moval of the sub-assembly.
4.
Guide the suction half casing (100A, with attached components) free of tapered alignment studs.
600A
600D
100D
600R
100A
600N
415B
600C
415B
553
Figure 74: Gland and suction liner
5.
Remove the hex head casing bolts (600A) from the gland half casing (100D).
6.
Remove the tapered alignment studs (600D) from the gland half casing (100D) using a metric stud
driver.
600A
600A
600D
600D
100D
100D
553
553
Figure 75: Removal of casing bolting
6.2.12 Remove the remaining suction half components - Rubber-Lined
Pump model
Next step to follow
XHD Value Option / Rubber-lined Single Piece Suction Liner
•
Remove the suction liner
6.2.13 Remove suction side liner - XHD Single Piece Suction Liner -
Rubber-Lined
1.
Remove the suction side liner retention nuts (357A).
2.
Remove suction side liner (600R) from suction half casing (100A).
6.2 Disassembly
96
XHD Installation, Operation, and Maintenance Manual
Summary of Contents for XHD
Page 1: ...Installation Operation and Maintenance Manual XHD ...
Page 2: ......