![background image](http://html.mh-extra.com/html/goulds-pumps/xhd/xhd_installation-operation-and-maintenance-manual_2247661062.webp)
1
2
3
4
5
6
Item
Description
Item
Description
1.
End plate, drive end
4
3/8-16 nut, 3 required
2.
End plate, pump end
5
3/8 in. washer
3.
Guard half, 2 required
6
3/8-16 x 2 in. hex head bolt, 3 required
Figure 35: Required parts
1.
De-energize the motor, place the motor in a locked-out position, and place a caution tag at the start-
er that indicates the disconnect.
2.
Put the pump-side end plate in place.
If the pump-side end plate is already in place, make any necessary coupling adjustments and then
proceed to the next step.
3.
Put the pump-half of the coupling guard in place:
a) Slightly spread the bottom apart.
b) Place the coupling guard half over the pump-side end plate.
1
2
3
4
Item Description
1.
Annular groove
2.
Pump-side end plate
3.
Driver
4.
Pump half of the coupling guard
5.9 Couple the pump and driver
60
XHD Installation, Operation, and Maintenance Manual
Summary of Contents for XHD
Page 1: ...Installation Operation and Maintenance Manual XHD ...
Page 2: ......